Crankcase breather filter Moroso 35mm

Moroso

Artnr: mor-68815

Stock Status: In Stock

Delivery Status: Will be sent as soon as possible

The product is normally in stock for direct delivery.

Description

Moroso crankcase filter 35mm neck

Similar Products

CatchTank Moroso with filter

CatchTank Moroso with filter

Crankcase breather filter 25mm

Crankcase breather filter 25mm

Dzus Spring 1" wide 0.325" deep

Dzus Spring 1" wide 0.325" deep

CatchTank 2liter

CatchTank 2liter

Catchtank2L (1.93L) / Crankcase ventilation - Aluminum - Top connection AN10 - bottom plug in the bottom with magnet M12x1.5mm. - Two connections 3/4-16 UNF (AN8) - Tank dimensions excluding filter: WxDxH 110x110x160 mm When hard trimming and …

Bracket around 61-71mm

Bracket around 61-71mm

Bracket around 76-82mm

Bracket around 76-82mm

CatchTank 1liter

CatchTank 1liter

Catchtank1L (0.9L)/ Crankcase ventilation - Aluminum- Top connection AN10 - bottom plug in the bottom with magnet M12x1.5mm. - Two connections 3/4-16 UNF (AN8) - Tank dimensions: WxDxH 76x76x160 mm For hard trimming and turbo installations combined with …

Filler cap with welding neck 59mm

Filler cap with welding neck 59mm

Dry sump oil tank 7.6L.

Dry sump oil tank 7.6L.

Dry sump oil tank. Height 43cm (with lid) x 18cm diameter (base 21cm square) Dual 1/2" BSP Males on top, dual splash guards. Return connection 3/4" BSP Male. Outlet 3/4" BSP Male.

Filler cap with welding neck 46mm

Filler cap with welding neck 46mm

Also Purchased Products

Stainless steel locking strap for exhaust bandage 1pc 300mm

Stainless steel locking strap for exhaust bandage 1pc 300mm

Mounting Rubber and washer for DCOE

Mounting Rubber and washer for DCOE

79-86mm T Clamp 3"+8mm

79-86mm T Clamp 3"+8mm

U-clamp 67

U-clamp 67

AN10 Aluminum weld nut

AN10 Aluminum weld nut

Copyright © 2026 H2M Racing. All rights reserved · Powered by LiteCart®