Emulsion tube DCOE/IDF (copy)
Artnr: 61450027 22-F2
Stock Status:
In Stock
Delivery Status: Will be sent as soon as possible
The product is normally in stock for direct delivery.
Description
Fits DCOE / IDF
Model F2, F7, F9, F11, F14 or F16
F7 gives richer partial acceleration and affects the low-speed part and usually works well on V8 or cars with a lot of porting or stingy overlap "lean spots", for engines with greater fuel requirements at low speed, you usually have to combine with a large air nozzle if it is too rich at high speeds.
F11 and F14 are the ones that are usually installed in new DCOE carburetors. They have a slightly leaner middle section. F11 is richer at high speeds than F14
For more info about the emulsion tubes, order our weber tuning manual.
Model F2, F7, F9, F11, F14 or F16
F7 gives richer partial acceleration and affects the low-speed part and usually works well on V8 or cars with a lot of porting or stingy overlap "lean spots", for engines with greater fuel requirements at low speed, you usually have to combine with a large air nozzle if it is too rich at high speeds.
F11 and F14 are the ones that are usually installed in new DCOE carburetors. They have a slightly leaner middle section. F11 is richer at high speeds than F14
For more info about the emulsion tubes, order our weber tuning manual.
