EGR & Intake Cleaner ProMeister

• Bottle, Manufacturer ProMeister, ProMeister Professional EGR and Intake Cleaner is a uniquely effective product for cleaning and removing contaminants and deposits found in the air intake, EGR system and turbo. Oils, resins, varnish and carbon deposits are quickly dissolved with minimal effort. Instructions for use: A) Preventive EGR valve cleaning, intake/throttle valve deposits and combustion chamber cleaning. *Shake well before use *Dismantle the air intake hose and remove visible contaminants as much as possible *Start the engine and wait until it has reached normal operating temperature. Partially close the air intake inlet (Approx. 75%) to increase the air velocity to create a better mixture of the product in the air flow and let the engine run at normal idle speed *Spray the product into the air intake in short bursts (2 seconds). MAKE SURE RPM is back to idle before using the next batch *Use the entire aerosol contents and run the engine at idle for at least 3 minutes, during this time increase the RPM a few times (max 2500 rpm) before shutting the engine off. B) Faulty EGR or turbo with heavy carbon deposits *Shake well before use *Dismantle the parts (Turbo & EGR housing) to gain access *Spray the product onto the deposits in the EGR housing and turbo. Let the product settle for a few minutes and repeat if necessary. If necessary, use a brush or cloth to remove loose deposits. MAKE SURE all parts are dry before reassembling. *Use the required amount and use the entire aerosol contents with procedure A for cleaning via the air intake to prevent rapid repeated build-up of deposits in the EGR system. *The contents of one aerosol are sufficient for one treatment via the air intake or cleaning of dismantled parts according to your needs *Professional EGR and intake cleaner should be used regularly on engines sensitive to intake fouling and DPF saturation.

• Volume 200 ml, Weight 0.200 kg