#401 Radiator gasket
Artnr: 401S
Stock Status:
In Stock
Delivery Status: Will be sent as soon as possible
The product is normally in stock for direct delivery.
Description
Radiator sealant seals leaks quickly and effectively in all types of water-based cooling systems, such as radiators, heat packs, gaskets and cracks in engine blocks.
Packaging: 300 ml bottle and 4 L can.
Dosage: 300 ml to 20 liters of coolant.
SEALS QUICKLY
Radiator sealant dissolves quickly in the circulating cooling system / heating system and stops leaks within about 30 minutes.
PROTECTS
While sealing the leak the entire system is protected against corrosion and scale formation.
ALL MATERIALS
For all types of materials that can occur in a heating system. Radiator seal is compatible with all common glycols and water-miscible fluids.
DOSAGE
1.5 -2% Radiator Seal is sufficient to seal a leaking cooling system in a vehicle. In larger cooling systems, the dosage can be reduced by a percentage.
INSTRUCTIONS FOR USE
1. Shake before use.
2. Add to circulating system.
3. When filling in an expansion vessel the vessel should be emptied if it does not have circulation through it.
4. Start the engine/circulation pump and ensure that the system circulates.
5. Run the engine/system for at least 30 minutes.
6. Set the heating control to maximum heat or completely off. (In case of leakage in the heating package = maximum heat.)
AREAS OF APPLICATION:
Cooling systems in vehicles. Heating systems in buildings. Underfloor heating coils, etc.
SEALS QUICKLY
Radiator sealant dissolves quickly in the circulating cooling system / heating system and stops leaks within about 30 minutes.
PROTECTS
While sealing the leak the entire system is protected against corrosion and scale formation.
ALL MATERIALS
For all types of materials that can occur in a heating system. Radiator seal is compatible with all common glycols and water-miscible fluids.
DOSAGE
1.5 -2% Radiator Seal is sufficient to seal a leaking cooling system in a vehicle. In larger cooling systems, the dosage can be reduced by a percentage.
INSTRUCTIONS FOR USE
1. Shake before use.
2. Add to circulating system.
3. When filling in an expansion vessel the vessel should be emptied if it does not have circulation through it.
4. Start the engine/circulation pump and ensure that the system circulates.
5. Run the engine/system for at least 30 minutes.
6. Set the heating control to maximum heat or completely off. (In case of leakage in the heating package = maximum heat.)
AREAS OF APPLICATION:
Cooling systems in vehicles. Heating systems in buildings. Underfloor heating coils, etc.
