Relay cable set 1pc Auxiliary light 12V|9006
Description
When operating a LED light or other fixture without a 9006 socket (female), cut off the connector and connect the cables. Soldering and heat shrink tubing or other safe sealing is recommended.
12V DC
60A relay
40A fuse
This relay kit can operate an LED light or additional light up to 300W (real power).
Connection
1. Connect to battery (+), ground point (-)
2. Power connector (+/-) on ballast (alt. cable light light)
3. Signal current (+) from the car's existing high beam switch
Special instructions not included.
Please note that some cars require a special relay solution (see accessory XBB Lightswitch) due to so-called Can-bus monitoring. This mainly applies to newer European cars with LED or xenon lights.
Good to know
If you shorten the wiring, you can operate LED ramps or auxiliary lights with higher power.
When extending, the maximum power decreases.
The longest distance between battery and light source is 3 meters.
Works equally well with halogen auxiliary lights.
Weight: 0.2 kg
