#407 Engine rinse aid
Artnr: 407S
Stock Status:
In Stock
Delivery Status: Will be sent as soon as possible
The product is normally in stock for direct delivery.
Description
Engine rinse is a highly effective cleaning agent for internal engine cleaning when changing oil. Removes dirt, deposits, sludge, resin and glycol. Prevents and fixes so-called “ticking” hydraulic lifters. A cheap, simple, fast and effective cleaning.
Giving your engine oil and engine a longer life is about 20 minutes.
Areas of use: All petrol and diesel engines and all types of compressors.
Dosage: 5 -10% of the volume, 300 ml to 4-6 litres of engine oil. Packaging: 300 ml bottle and 4 L can.
During combustion
During combustion, an engine produces water, acids, sludge, coke, resin, undissolved salts, gases and unburned fuel. Some of these substances burden the engine oil and cause its properties and life to deteriorate. At the same time, deposits are created over time in the engine.
WEAR OCCURS
These deposits acidify the environment in the engine and cause parts to wear out, hydraulic lifters to tick, piston rings to stick and fuel and oil consumption to increase.
ACID ENVIRONMENT
When changing the oil, the new engine oil normally turns black and acidified immediately by the existing oil residues. This results in a shorter engine oil life compared to if the engine was clean inside.
CLEANER ENGINE
Engine rinse agents clean the engine's internal parts from deposits and are then drained out when the oil is changed. The deposits are carried out with the waste oil and the engine becomes clean inside. The result is that the new engine oil retains its alkalinity and performance longer.
DOSAGE:
5 - 10% of the oil volume.
Ex. 300 ml is sufficient for an oil system of up to 6 liters.
INSTRUCTIONS FOR USE:
1. Run the engine warm.
2. Pour Motorkölj into the old existing engine oil.
3. Let the engine idle or drive a short distance.
4. Drain the oil after 20-30 minutes.
5. Change the filter and pour in new engine oil.
AREAS OF USE
For gasoline, diesel and ethanol engines as well as compressors. A good alternative to today's Longlife oils.
Giving your engine oil and engine a longer life is about 20 minutes.
Areas of use: All petrol and diesel engines and all types of compressors.
Dosage: 5 -10% of the volume, 300 ml to 4-6 litres of engine oil. Packaging: 300 ml bottle and 4 L can.
During combustion
During combustion, an engine produces water, acids, sludge, coke, resin, undissolved salts, gases and unburned fuel. Some of these substances burden the engine oil and cause its properties and life to deteriorate. At the same time, deposits are created over time in the engine.
WEAR OCCURS
These deposits acidify the environment in the engine and cause parts to wear out, hydraulic lifters to tick, piston rings to stick and fuel and oil consumption to increase.
ACID ENVIRONMENT
When changing the oil, the new engine oil normally turns black and acidified immediately by the existing oil residues. This results in a shorter engine oil life compared to if the engine was clean inside.
CLEANER ENGINE
Engine rinse agents clean the engine's internal parts from deposits and are then drained out when the oil is changed. The deposits are carried out with the waste oil and the engine becomes clean inside. The result is that the new engine oil retains its alkalinity and performance longer.
DOSAGE:
5 - 10% of the oil volume.
Ex. 300 ml is sufficient for an oil system of up to 6 liters.
INSTRUCTIONS FOR USE:
1. Run the engine warm.
2. Pour Motorkölj into the old existing engine oil.
3. Let the engine idle or drive a short distance.
4. Drain the oil after 20-30 minutes.
5. Change the filter and pour in new engine oil.
AREAS OF USE
For gasoline, diesel and ethanol engines as well as compressors. A good alternative to today's Longlife oils.
