AN10 Thermostatic Waffle Billet

Billet model with socket for sensor. Filter wafer that is placed between filter and engine. Diameter of gasket surface: Max 72mm / min 54mm Thermostat that opens fully at 85 degrees C Allows you to get a faster warm-up to operating temperature. Filter thre

H2M Import

Artnr: H2M-OA11

Stock Status: In Stock

Delivery Status: Will be sent as soon as possible

The product is normally in stock for direct delivery.

Description

Billet model with socket for sensor.
Filter waffle that is placed between filter and engine.
Diameter of gasket surface: Max 72mm / min 54mm
Thermostat that opens fully at 85 degrees C
Gives you a faster warm-up to operating temperature.
Filter thread 3/4-16 and M20x1.5mm
Connection thread for oil cooler AN10 Male

Similar Products

Earls Oil Cooler Outlet 3/4-16

Earls Oil Cooler Outlet 3/4-16

Earls Oil Cooler Outlet 20mm x 1.5

Earls Oil Cooler Outlet 20mm x 1.5

Oil cooler outlets 3/4-16 and M20

Oil cooler outlets 3/4-16 and M20

Waffle adapter to be placed between oil filter and engine. In and out for oil cooler. Two adapters for oil filter thread: 3/4-16 inch. and M20x1.5mm Thread on in / out: AN10. Nipples included. Black anodized. Two extra 1/8NPT connections in …

Oil cooler outlet / filter mover M20, AN10

Oil cooler outlet / filter mover M20, AN10

Dry sump oil tank 7.6L.

Dry sump oil tank 7.6L.

Dry sump oil tank. Height 43cm (with lid) x 18cm diameter (base 21cm square) Dual 1/2" BSP Males on top, dual splash guards. Return connection 3/4" BSP Male. Outlet 3/4" BSP Male.

Perma-Cool Oil filter holder for 3/4-16 threaded filter. Right-hand connection

Perma-Cool Oil filter holder for 3/4-16 threaded filter. Right-hand connection

NOTE connection to the Right Oil filter holder: Oil Filter Thread Size: 3/4-16 in. Inlet Quantity: One Inlet Attachment: Female threads Inlet Size: 1/2 in. NPT Outlet Quantity: One Outlet Attachment: Female threads Outlet Size: 1/2 in. NPT Oil …

Perma-Cool Oil filter holder for 13/16-16 threaded filter. Connect upwards

Perma-Cool Oil filter holder for 13/16-16 threaded filter. Connect upwards

Perma-Cool Oil filter holder for 3/4-16 threaded filter. Connect right & left

Perma-Cool Oil filter holder for 3/4-16 threaded filter. Connect right & left

AN10 Thermostatic wafer

AN10 Thermostatic wafer

Filter wafer that is placed between the filter and the engine.Diameter of the gasket surface: Max 74mm / min 51mmThermostat that opens completely at 85 degrees C Gives you a faster warm-up to operating temperature. Filter thread 3/4-16 Connection thread to

Perma-Cool Oil filter holder for 3/4-16 threaded filter. Connect upwards

Perma-Cool Oil filter holder for 3/4-16 threaded filter. Connect upwards

Also Purchased Products

Angle bracket

Angle bracket

AN10 Fitting Straight, for hose

AN10 Fitting Straight, for hose

Siemens Deka 630cc

Siemens Deka 630cc

The popular 630cc injectors from Siemens.High impedance (12ohm)630cc at 3 barFlow matched from the factory4-hole injector pattern that provides good fogStandard length with standard EV1 connector - Fits many applicationsDead times at 3 …

U-clamp 92

U-clamp 92

Black AN10 Fitting Straight, for hose

Black AN10 Fitting Straight, for hose

Copyright © 2026 H2M Racing. All rights reserved · Powered by LiteCart®