VOLVO 'Extrem' manifold 8v -T4 flange- 82.5x70mm
Artnr: klg-vt4
Stock Status:
In Stock
Description
New 8V Manifold "Extrem" for volvo 8v
NOTE: Flange: 82.5x70mm (picture shows T3)
Gasket against the cylinder head is NOT included, choose it if you want to add it to your order.
Wastegate flange: HKS silver model - split pipe all the way to the wg flange:
recommended Wg:
http://www.h2mracing.se/webbutik/product_info.php?products_id=2939
Very carefully calculated manifold, see link on savarturbo.se:
http://forum.savarturbo.se/viewtopic.php?t=18435&postdays=0&postorder=asc&highlight=jens+grenr%F6r&start=45
Get weld joints
For the discerning, it is possible to match grind the pipe and flange some mm
AND, if you want to have a split all the way to the flange, you have to weld in a partition in the collector
AND: If you have a T4 flange (89x70mm) on the turbo, you have to take up the bolt holes 3.2.mm on each side
NOTE: Flange: 82.5x70mm (picture shows T3)
Gasket against the cylinder head is NOT included, choose it if you want to add it to your order.
Wastegate flange: HKS silver model - split pipe all the way to the wg flange:
recommended Wg:
http://www.h2mracing.se/webbutik/product_info.php?products_id=2939
Very carefully calculated manifold, see link on savarturbo.se:
http://forum.savarturbo.se/viewtopic.php?t=18435&postdays=0&postorder=asc&highlight=jens+grenr%F6r&start=45
Get weld joints
For the discerning, it is possible to match grind the pipe and flange some mm
AND, if you want to have a split all the way to the flange, you have to weld in a partition in the collector
AND: If you have a T4 flange (89x70mm) on the turbo, you have to take up the bolt holes 3.2.mm on each side
