Bosch 044 banjo Fitting

Sytec

Artnr: EFPA2201

Stock Status: In Stock

Delivery Status: Will be sent as soon as possible

The product is normally in stock for direct delivery.

Description

banjo Fitting kit for 044, to connect the pump to a hose with an internal diameter of 8mm. dome nut M12 x 1.5mm

Similar Products

Bosch 044 rubber cap for cables

Bosch 044 rubber cap for cables

Banjo bolt M12x 1.5mm with 8mm nipple

Banjo bolt M12x 1.5mm with 8mm nipple

AN6 Banjo for M12 Banjo Bolt

AN6 Banjo for M12 Banjo Bolt

Bosch 044 in tank prefilter. Rectangular filter

Bosch 044 in tank prefilter. Rectangular filter

Walbro tank prefilter 50x105mm

Walbro tank prefilter 50x105mm

Walbro tank prefilter 55x115mm

Walbro tank prefilter 55x115mm

Pre-filter set for WalbroIn-Tank Fuel Injection FilterLength mm:- 115mm Width mm:- 55mm Outlet mm:- 11mm Micron:- 30-60 Micron

Walbro tank prefilter 85x56mm

Walbro tank prefilter 85x56mm

Walbro tank prefilter 153x58mm

Walbro tank prefilter 153x58mm

Walbro tank prefilter 105x88mm

Walbro tank prefilter 105x88mm

Walbro electric cable with connector

Walbro electric cable with connector

Also Purchased Products

67-75mm T Clamp 2.5"+8mm

67-75mm T Clamp 2.5"+8mm

Xenon bulb D1S 1pc (4300K)

Xenon bulb D1S 1pc (4300K)

Spare part D1S 4300K, replaces original mounted 4300K lamps. D1S is installed in passenger cars, work lights, trucks etc. It is a square ignition module at the back of the lamp with a 3-pin connector Choose between 4300K (Original white) 6000K (Diamond whi

Welding bend 89 mm

Welding bend 89 mm

Stainless steel locking strap for exhaust bandage 1pc 300mm

Stainless steel locking strap for exhaust bandage 1pc 300mm

pipe bend 76.0mm -45 Degree bend RF

pipe bend 76.0mm -45 Degree bend RF

Copyright © 2025 H2M Racing. All rights reserved · Powered by LiteCart®