Cable separators, Moroso 8-9mm

Moroso

Artnr: 72163

Stock Status: In Stock

Delivery Status: Will be sent as soon as possible

The product is normally in stock for direct delivery.

Description

Cable separators from Moroso for ignition cables that are 8 or 9mm.

Sold as a set of 3 different sizes with 2 of each in a set.

Similar Products

Crankcase breather filter Moroso 35mm

Crankcase breather filter Moroso 35mm

Dzus Spring 1" wide 0.325" deep

Dzus Spring 1" wide 0.325" deep

Bracket around 61-71mm

Bracket around 61-71mm

Bracket around 76-82mm

Bracket around 76-82mm

Ignition Amplifier 3 Channels

Ignition Amplifier 3 Channels

Ignition Amplifier 2 Channels

Ignition Amplifier 2 Channels

Ignition amplifier / nIgnition module with 2 separate ignition outputs. Connector not included! 7 pin. 1: IGN1 out 2: IGN1 in 3: not connected 4: Ground 5: not connected 6: IGN2 out 7: IGN2 in Manufacturer: Hueco

Ignition Amplifier 4 Channels

Ignition Amplifier 4 Channels

Cable separators, Summit, 8mm

Cable separators, Summit, 8mm

Cable separators with metal brackets as shown. Suitable for 8mm cables, but you can probably use other sizes without any major problems. Sold as a set with all parts shown in the picture.

Cable separators, Taylor 7-7.5mm

Cable separators, Taylor 7-7.5mm

CatchTank Moroso with filter

CatchTank Moroso with filter

Also Purchased Products

Fuel regulator Carburetor Filterking 85mm

Fuel regulator Carburetor Filterking 85mm

Steel pipe 50.8mm * 1000mm RF

Steel pipe 50.8mm * 1000mm RF

Band clamp 54 mm RF

Band clamp 54 mm RF

pipe bend 50.8mm -60 Degree bend.

pipe bend 50.8mm -60 Degree bend.

Spray Paint Rim Gold Acrylic Paint 500ml Motip

Spray Paint Rim Gold Acrylic Paint 500ml Motip

Copyright © 2026 H2M Racing. All rights reserved · Powered by LiteCart®