MSD Timing Tape for vibration dampers
Artnr: MSD-8985
Stock Status:
In Stock
Delivery Status: Will be sent as soon as possible
The product is normally in stock for direct delivery.
Description
Timing tape that can be glued to the vibration damper/pulley on the front of the engine.
Each strip is approximately 8.5mm wide and the sheet comes in different lengths for the following vibration damper diameters:
8.0" - 203mm
7.5" - 190mm
7.25" - 184mm
7.0" - 178mm
6.75" - 171mm
6.375" - 162mm
6.0" - 152mm
5.25" - 133mm
It is important that you use the correct strip for the correct diameter of the vibration damper, otherwise the ignition values will be skewed.
Each strip is approximately 8.5mm wide and the sheet comes in different lengths for the following vibration damper diameters:
8.0" - 203mm
7.5" - 190mm
7.25" - 184mm
7.0" - 178mm
6.75" - 171mm
6.375" - 162mm
6.0" - 152mm
5.25" - 133mm
It is important that you use the correct strip for the correct diameter of the vibration damper, otherwise the ignition values will be skewed.
